Electric in-floor heating systems.

Heatlay is the premier manufacturer of easy-to-install electric floor heating systems.

Radiant heating systems manufacturer - Kitchener, Onatrio, Canada, North America.

Product Features

Even Heat Distribution

Each Heatlay mat uses a wire layout optimized to ensure even heat distribution. Standard mats provide an average of 12W/sqft of heating while custom mats range from 12W/sqft -15W/sqft (dependent upon the site specific heating requirements).

Design

ETL listed to the latest CSA standard; C22.2 No. 130-03 Requirements for Electrical Resistance Heating Cables and Heating Device Sets.

TCNA (Tile Council of North America) rated for Extra-Heavy use, well above residential and light commercial requirements. TCNA report

Contact

Single layer membrane design allows for full mortar contact with the cable and superior heat transfer.

Single layer membrane also provides a clean and flat installation, less mortar mess and no troublesome wire pop-ups.

electric radiant systems schemahow to apply the mortar on electric radiant systems

Size

Low profile mat, approximately 1/8" thick.

14AWG Cold Lead! Same size as house wiring, don’t settle for tiny 16AWG or 18 AWG leads.

Strength

All electrical connections mechanically crimped! Strong and dependable connection - meets UL486C standard requirements, don’t settle for soldered connections.

Stainless steel wire braidprovides mechanical protection and resistance to mortar corrosion.

in-floor heating-radiant mat radiant heating mat